Cómo instalar los Project Web Access ActiveX Controls de forma manual
Si es necesario instalar los ActiveX de Project Web Access se pueden seguir los siguientes pasos:
Remover los controles ya instalados
Project 2007
1.Start Internet Explorer.
2.On the Tools menu, click Internet Options.
3.Click the General tab, and then click Settings in the Browsing history section.
4.Click View Objects.
5.Right-click Pj12enuC Class, and then click Remove.
6.Right-click PjAdoInfo4 Class, and then click Remove.
7.Close the View Objects window, and then click OK two times.
Project 2003
1.Start Internet Explorer.
2.On the Tools menu, click Internet Options.
3.Click the General tab, and then click Settings in the Browsing history section.
4.Click View Objects.
5.Right-click Pj11enuC Class, and then click Remove.
6.Right-click PjAdoInfo3 Class, and then click Remove.
7.Close the View Objects window, and then click OK two times.
Registrar los controles manualmente
Project 2007
Los cabs están en C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\PWA\OBJECTS
•Pjclient.cab
•Pjcintl.cab
•Pjcintl.cab:
•LangcabENU12.inf
•Pj12ENUc.dll
•Pjclient.cab:
•Microsoft.vc80.crt.manifest •Msvcr80.dll
•Pjgrid12.ocx
•Pjprint12.dll
•Pjquery12.ocx
•Pjres12c.dll
•Pjtextconv12.dll
1.Log on to your computer as an administrator.
2.Connect to Project Server, and then copy the Pjclient.cab file and the Pjcintl.cab file from the following folders, respectively:
C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\PWA\OBJECTS
C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\PWA\OBJECTS\1033
3.Paste the files in a folder on your computer.
4.Double-click the Pjcintl.cab file to open it, and then select all the files that are listed.
5.On the File menu, click Extract.
6.Expand My Computer, expand Local Disk (C:), expand Windows, and then click Downloaded Program Files.
7.Click Extract.
8.Close the Pjcintl.cab file.
9.Double-click Pjclient.cab to open it, and then click Select all on the Edit menu.
10.On the File menu, click Extract.
11.Expand My Computer, expand Local Disk (C:), expand Windows, and then click Downloaded Program Files.
12.Click Extract.
13.Close the Pjclient.cab file.
14.Click Start, click Run, type CMD, and then click OK.
15.Type CD %windir%\Downloaded Program Files, and then press ENTER.
16.Type for %i in (pj*.dll) do regsvr32 %i, and then press ENTER.
17.Confirm that registration was successful in each window that opens. Click OK to close each regsvr32 window.
18.Type for %i in (pj*.ocx) do regsvr32 %i, and then press ENTER.
19.Confirm that registration was successful in each window that opens. Click OK to close each regsvr32 window.
Project 2003
Microsoft Project Server\IIS Virtual Root\Objects
•Pjclient.cab
•Pjcintl.cab (in the 1033 subfolder or other language folders)
These two cab files contain the following files:
•Pjcintl.cab:
•Pj11enuc.dll
•LangCabENU11.inf (This file is not required for the manual installation of controls.)
•Pjclient.cab:
•Pjclient11.inf (This file is not required for the manual installation of controls.)
•Pjres11c.dll
•Pjpront11.dll
•Pjquery11.ocx
•Pjtextconv11.dll
•Pjcalendar11.ocx
•Pjgrid11.ocx
•Pjoffline11.ocx
•Pjoutlook11.ocx
•Pjsecurity11.ocx
•Pjupdate11.ocx
1.Log on to your computer as Administrator.
2.Connect to Project Server, and then copy the Pjclient.cab file and the Pjcintl.cab file from the Microsoft Project Server\IIS Virtual Root\Objects folder. Paste the files in a folder on your computer.
3.Double-click the Pjcintl.cab file to open it, and then select all the files that are listed.
4.On the File menu, click Extract.
5.Expand My Computer, expand Local Disk (C:), expand Windows, and then click Downloaded Program Files.
6.Click Extract.
7.Close the Pjcintl.cab file.
8.Double-click Pjclient.cab to open it, and then click Select all on the Edit menu.
9.On the File menu, click Extract.
10.Expand My Computer, expand Local Disk (C:), expand Windows, and then click Downloaded Program Files.
11.Click Extract.
12.Close the Pjclient.cab file.
13.Click Start, click Run, type CMD, and then click OK.
14.Type CD %windir%\Downloaded Program Files, and then press ENTER.
15.Type regsvr32 pj11enuc.dll , and then press ENTER.
16.Type regsvr32 pjres11c.dll, and then press ENTER.
17.Type for %i in (pj*.dll) do regsvr32 %i, and then press ENTER.
18.Confirm that registration was successful in each of the windows that open. Click OK to close each regsvr32 window.
19.Type for %i in (pj*.ocx) do regsvr32 %i, and then press ENTER.
20.Confirm that registration was successful in each of the windows that open. Click OK to close each regsvr32 window.
Comments